English; Technical Data; Care And Maintenance - Roto ZRE 6 H/K Serie Manual Del Usuario

English

General safety instructions
• Read this manual carefully before installing and op-
erating the device and follow all instructions.
• Ensure that these instructions are accessible to all
users.
• Keep these instructions in a safe place until you dis-
pose of the product.
• If the product changes hands, pass these instruc-
tions on to the new owner.
Intended use
The "exclusiv" roller blind is intended for inside installa-
tion and protects against heat and sunlight.
It may only be installed and used on Roto skylight
types designed for its use.
The "exclusiv" roller blind reflects and absorbs a large
portion of solar radiation, but does not offer full protec-
tion against sunlight and heat (in a physical sense).

Technical data

The dimensions depend on the type and size of the
window.
Unpacking/checking the scope
of delivery
(Fig. A1-A2)
⚠
Risk of suffocation!
Plastic parts, polystyrene, screws, small
parts, etc., can be very dangerous for chil-
dren to play with.
> Do not leave the packaging material and installa-
tion parts lying around, and keep away from chil-
dren and toddlers.
> Keep children away from the installation site
throughout the installation procedure.
• Please dispose of the packaging material (cardboard,
polystyrene, plastic bag) according to local regula-
tions.
• When unpacking and installing the device, work with
clean hands or with gloves to avoid soiling the prod-
uct.
• Please check the scope of delivery. If parts are miss-
ing, consult a dealer.
• The screwing aid (Fig. A2, part K) is a tool and not
an installable part.
4
Preparing tools/aids
(Fig. A3)
• Cross-head screwdriver, PZ1
• If needed: stable climbing equipment (step ladder)
• Screwing aid (Fig. A2, part K)
Installation
(Fig. 1-4)
⚠
Risk of falling!
> Do not lean out of the skylight.
> Only use climbing equipment that is resting on a
solid foundation and that offers good support and
high carrying capacity.
⚠
Risk of injury from falling components!
> To mount the product, only use fixing materials
that were included in the delivery and that are
suitable for the window frame material.
> Never place tools, components and fixing materi-
als on the climbing equipment.
> Keep children away from the installation site
throughout the installation procedure.
• During the entire installation procedure, ensure that
the cord is not pinched.
Settings
(Fig. 5)
Settings are not required after installation. The cord
tension is preadjusted at the factory.
If the handle rail of the roller blind is not parallel to the
cassette, the handle rail must be aligned once:
• Open the handle rail fully (slide it toward the cas-
sette) and then close it completely.
Operation
Opening and closing the roller blind
(no figure)
• Hold the roller blind at the centre of the handle and
slide it to the desired position.
It stops in any position.

Care and maintenance

To ensure a long life, we recommend cleaning the alu-
minium surface of the product at least once a year.
• Wipe the aluminium surface with a moist cloth only.
• Carefully brush off the roller blind fabric.