Manual Activation Of The Loading System - CASATELLI LEONARDO 8ET Generalidades - Advertencias - Instalación - Mantenimiento

12.7 MANUAL ACTIVATION OF THE LOADING SYSTEM

If it is the first use (pellet tank initially empty) or to test the loading unit operation, the load can be started
manually.
On the stove control panel:
a) Use the arrow keys to go to the set-up menu
b) Select the password "7" with the
c) Scroll with the
d) select the password "54" with the
e) When the key is pressed and held down, the loading system is activated and the increment bars are
shown on the display.
f) When the key is released, the loading operation is halted.
Attention!
• This function is only available when the stove is switched off and cold.
• Before switching it on again, make sure that there are no pellets in the burn pot.
48
key and confirm with the
key and select the submenu
key and confirm with the
004778330 - 16/07/2020
and press the key;
key;
[31]
;
key;