Display Mode Setting; Volume Setting - CASATELLI LEONARDO 8ET Generalidades - Advertencias - Instalación - Mantenimiento

10.3.2 Display brightness setting
It is possible to set the dimming of the display brightness when in standby mode.
a) Use the arrow keys to go to the set-up menu
b) Select the password "7" with the
c) Scroll with the
d) Use the and

10.3.3 Display mode setting

It is possible to set what should be shown on the display when the latter is in standby mode
a) Use the arrow keys to go to the set-up menu
b) Select the password "7" with the
c) Scroll with the
d) Set one of the following values with the
OFF
" "
• The display will remain fixed on the last display operated by the user;
1
" "
• All the operating parameters will be displayed cyclically;
2
• The temperature is displayed (detected by the room probe)
" "
3
" "
• The current time is displayed
4
" "
• The autonomy is displayed in hours before having to refill the tank, if the refuelling function
has been enabled.
e) Press the key

10.3.4 Volume setting

Set the volume level of the buzzer, according to your requirements:
a) Use the arrow keys to go to the set-up menu
b) Select the password "7" with the
c) scroll with the
d) Use the and
10.3.5 Fuel optimisation
Excellent fuel depends on different factors (type of installation, operating and maintenance conditions, type of
pellets, etc.)
Generally speaking, if at the end of combustion, there is a lot of residue in the burn pot, you should change the
combustion configuration (by increasing the value) until you find the best solution.
a) Use the arrow keys to go to the set-up menu
b) Select the password "
c) Scroll with the
d) Set one of the following values with the
1
" "
2
" "
3
" "
e) Press the key
44
key and confirm with the
key and select the sub-menu
keys to set the desired brightness value (
key and confirm with the
key and select the sub-menu
and
to confirm the set data.
key and confirm with the
key and select the submenu
keys to set the desired volume level (
7
" with the key and confirm with the
key and select the submenu
and
to confirm the set data.
004778330 - 16/07/2020
and press the key;
key;
[11]
and confirm with the
OFF, 1 ... 5
and press the key;
key;
[12]
and confirm with the
keys:
and press the key;
key;
[13]
and confirm with the
OFF,1 ... 5
) and confirm with the
and press the key;
key;
[14]
and confirm with the
keys:
key;
) and confirm with the key.
key;
key;
key.
key;