Care And Maintenance; Troubleshooting - AquaSource 67459-0001 Guia De Inicio Rapido

OPERATION INSTRUCTIONS
1. After the installation is complete:
a. Remove the aerator on the faucet (A).
b. Turn on the water supply and allow
both hot and cold water to run for at
least one minute each.
c. While the water is running, check for
leaks.
d. Replace the aerator.

CARE AND MAINTENANCE

• Clean carefully by gently wiping with a grit-free damp cloth.
• Use only mild soap with water.
• Never use acids, harsh chemicals, or abrasive detergents to clean the faucet surface.

TROUBLESHOOTING

PROBLEM
There is a leak under the handle. The cartridge is damaged.
There is an inconsistent water-
The spout/aerator has a leak.
POSSIBLE CAUSE
The aerator is dirty or does not Unscrew the aerator and check
The cartridge is damaged.
5
1
A
CORRECTIVE ACTION
Remove the handle and replace
the cartridge.
the rubber washer or replace
the aerator.
Remove the handle and replace
the cartridge.