Care And Maintenance - AquaSource 67157-1027H2 Manual De Instrucciones

ASSEMBLY INSTRUCTIONS
5. Connect a 1/2 in. IPS faucet connector or
coupling nuts (not included) with 3/8 in.
O.D. ball-nose risers (not included) to the
water supplies underneath the sink using
wrenches (not included).
NOTE: Refer to the local plumbing codes for
permissible types of water supply
connectors.
OPERATING INSTRUCTIONS
1. After the installation is complete:
a. Remove the aerator on the faucet (A).
b. Turn on the water supply and allow both
hot and cold water to run for at least one
minute each.
c. While the water is running, check for
leaks.
d. Re-attach the aerator.

CARE AND MAINTENANCE

• Clean carefully by gently wiping with a grit-free damp cloth.
• Use only mild soap with water.
• Never use acids, harsh chemicals, or abrasive detergents to clean the faucet surface.
5
1
5
A
Lowes.com