Sanyo ICR-1000 Manual De Instrucciones página 12

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

VAS: Selecting Voice Activated System mode
OFF: To start and stop recording manually
ON: Recording begins when the microphone picks up sound, and stops
automatically after the sound stops. "VAS" appears.
Press the F or E button to set the microphone's sensitivity
when recording begins. The VAS sensing level appears on the
display.
REC TIME: Selecting recording time mode
LP: For long time recording
SP: For standard recording
HQ: For high-quality recording
XHQ: For extra high-quality recording
REC
TIME
LP
SP
HQ
XHQ
Recording time in the table shows rough standard time. It will be different
somewhat depending on SD Card.
Note:
Setting or changing recording time can be used for a new file recording.
When overwrite or insertion recording starts on the recorded file, it follows
the file's recording time.
When "XHQ" mode is selected, "XHQ" segment does not appear on the
display.
GB-11
"VAS 0"
"VAS 10"
Low
High
64MB
8 hr. 20 min.
4 hr. 10 min.
3 hr. 0 min.
2 hr. 0 min.
(Initial
Setting)
Recording Time (approx.)
128MB
17 hr. 20 min.
8 hr. 40 min.
6 hr. 15 min.
4 hr. 15 min.
[ENGLISH]
256MB
34 hr. 40 min.
17 hr. 20 min.
12 hr. 30 min.
8 hr. 30 min.

Publicidad

Tabla de contenido
loading

Tabla de contenido