Additional Equipment Automatic Feeder - Parker Parflange 1050 Manual De Manejo

Parflange 1050
6.5

Additional Equipment Automatic Feeder

This facility, designed for large
production quantities, is mounted to the
Parflange 1050 and feeds the required
sleeves into the clamping jaws.
The drive is performed automatically via
the Parflange 1050. The feeder reduces
the manual operation down to a
minimum, the required cycle time is
shortened.
Before starting the machine, make sure that all protective facilities and
safety requirements, for instance removable protective facilities, emergency-
off switches, are available and in working order!
Faults which might have an adverse effect on security, must be eliminated
immediately!
41