GYS MATIC TRUECOLOR XL Manual Del Usuario página 9

Translation of the original instructions
PRECAUTIONS
• The welding helmet is suitable for use with virtually all welding processes except Oxy-Acetylene welding, laser welding and gas.
• Standard protective screens must be installed on both inside and outside surfaces of the module. Failure to use protective screens may constitute a safety hazard or result
in irreparable damage to the module.
HEADBAND ADJUSTMENT
4
MAINTENANCE
• Expiration date: No expiration date for this product but the state of the GYSMATIC LCD XL welding helmet must be checked before each use.
• The GYSMATIC LCD XL must not be dropped
• Do not put any heavy tools/objects in or on the helmet in order not to damage the filter or the protective screens.
The deterioration of the optoelectronic filter or its protective screen can reduce the vision field or the protection level. Replace the damaged parts.
• Do not use any tools or other sharp objects to remove any components of filter or helmet. Doing so may damage filter or helmet, preventing proper function, possibly
causing injury or cancellation of the warranty.
• Clean the filter with a clean cotton or lens cloth.
• Clean and change protective screens on a regular basis.
• Clean the inside and the outside of the helmet with a neutral disinfectant product.
• Do not use any solvent.
REPLACEMENT OF INSIDE AND OUTSIDE PROTECTIVE SCREENS.
C
B
A
REPLACING BATTERIE
The opto-electronic filter requires one 3V lithium battery (CR2450).
Follow the instructions below to change batteries:
- Pull the cover (11) and then remove the battery.
- Place a new battery in position. Polarity «+» must stay visible.
- Put the cover back (11).
- We recommend to replace the battery once a year.
CAUTION
- Recycle used lithium batteries. In Europe, batteries are considered as dangerous waste.
- Do not throw in the bin. To drop off only in collection point for used batteries.
GYSMATIC TRUECOLOR XL
Clear shade 4
Dark shade 5-13
Filter dimension 110x90x8.5 mm
Reaction speed 0.08 ms
Power supply Solar + battery
Weight 590 gr
Field of vision 100x60mm
Applications MMA 5>400A / TIG 5>300A / MIG-MAG 5>500A / Grind
Warranty 2 years
Application temperature -5°C / + 55°C
Storage temperature -10°C / + 60°C
1
2
3
The headband HG-2002 is lightweight and ergonomic. Its 3 points adjustable
balance design provides more flexibility and comfort.
1- Headband adjustment
2- Headband slider(with 3 slots)
3- Block washer adjustment
4- Longitudinal adjustment
1. Unclip the screen support (A).
2. Replace the external screen (B).
3. Replace the internal screen (C).
4. Put the screen support back (A).
9
EN