Acuity Brands AEDAN Instrucciones De Seguiridad-Instalacion Manual Operativo página 14

5
5. MAKE FINAL ELECTRICAL CONNECTIONS:
5a. Connect AC line to driver AC input, matching wire
colors: BLACK to BROWN and WHITE to BLUE.
Connect AC ground (GREEN) to driver ground
(GREEN-YELLOW) and fixture body ground (GREEN
from the STEM) together. Use the (3) large
WIRE NUTs provided.
Using (2) two small WIRE NUTs provided, make
5b.
dimmer connections. Connect PURPLE to PURPLE
and GREY to GREY. If dimming is not desired, fold
and cap off the PURPLE and GREY leads on the
driver with (2) of the small WIRE NUTs provided.
5c. Insert all wires and WIRE NUTs into the junction
box. Make final adjustment to LUMINAIRE BODY
orientation. Lift up the CANOPY COVER and attach by
pushing up and rotating clockwise. Take care not to
pinch any wires in the process.
WARNING: DO NOT SPIN THE LUMINAIRE
COUNTER-CLOCKWISE. THE THREADS IN THE STEM
MAY BECOME UNDONE AND CAUSE THE LUMINAIRE
TO FALL.
14
(Figure 5a)
(Figure 5c)
5a
5c