Technical Specifications - Laica BP-2220 Instrucciones Y Garantía

English
EN
specialised health agency.
The segments on the left of the display indicate the classification of blood pressure readings
BLOOD PRESSURE CLASSIFICATION SYSTOLIC (mmHg) DIASTOLIC (mmHg)
OPTIMAL <120
Normal 120 – 129
Normal – High 130 – 139
Ipertension 1st grade - Light 140 – 159
Ipertension 2nd grade - Moderate 160 – 179
≥180
Ipertension 3rd grade - Severe
Values below 105 mmHg (systolic) and 60 mmHg (diastolic) indicate hypotension. We recommend seeking
medical advice.This device is able to detect irregular heartbeats, or arrhythmia, indicating them on the display
with the symbol . Arrhythmia may be caused by frequent anxiety, certain emotional states, excessive
alcohol use, genetic predisposition, age or other. It can be a symptom of a particular physical or mental condition
(temporary disturbance) or an actual heart problem. Always seek medical advice if the monitor displays
the irregular heartbeat symbol.
PRODUCT DESCRIPTION (SEE FIG.1)
1) LCD DISPLAY
2) "M" key
3) "O/I" key
4) Cuff
5) Battery compartment
6) Batteries
7) Case

TECHNICAL SPECIFICATIONS

• Product name: Blood pressure monitor
• Commercial name: BM1006
• Classification: Internally powered, Type BF applied part, IP22, No AP or APG, Continuous operating mode
SEGMENT COLOR
<80 Green
80 – 84 Green
85 – 89 Green
90 – 99 Yellow
100 – 109 Orange
≥110
Red
26
• Method: oscillometric, automatic air inflation and measurement
• Measurement range: from 0 to 300 mmHg (cuff pressure),
from 30 to 180 beats/min (heart rate)
• Precision: systolic, diastolic ±3 mmHg
heart rate ±5% of reading
• Memories: 60 memories per area (2 areas)
• Wrist circumference: between approx. 135 and 215 mm
• Power supply: 2 x 1.5V AAA alkaline batteries (LR03)
• Battery autonomy: approx. 2 months at 3 tests per day
• Environmental conditions for use: from +10°C to +40°C; relative humidity between 15% and 93% RH
• Environmental conditions for storage: from -25°C to +70°C; relative humidity ≤93% RH
• Atmospheric pressure for use and storage: 700 hPa - 1060 hPa
• The blood pressure monitor has been designed to maintain its performance and safety characteristics for
approx 3 years at 10 test per day.
INSTRUCTIONS FOR USE
BATTERY INSERTION/REPLACEMENT
The blood pressure monitor works with 2 disposable 1.5V AAA alkaline batteries.
At first use and when the display shows the battery symbol
Open the battery compartment using the tab on the cover, then insert the batteries according to the indicated
poles and close the cover. Dispose of worn batteries as described in the "Disposal procedure" paragraph.
SETTING MEMORY ZONE AND DATE/TIME
1) With the unit off, press the "O/I" button for 3 seconds, the display will flash the last memory zone selected
(" " or " "). To select the memory zone desired, press the "M" key and confirm your choice by pressing
the "O/I" button. At this point, the display flashes the number for the year (fig.2). Use the "M" key to adjust
the figure, holding it down will speed up the scrolling of the numbers. Press the "O/I" button to confirm it.
2) Now the month flashes: adjust with the "M" key and confirm by pressing the "O/I" button.
3) Now the day flashes: adjust with the "M" key and confirm by pressing the "O/I" button.
4) Now the hour flashes: adjust with the "M" key and confirm by pressing the "O/I" button (the display shows
the time in 12 and 24 hour formats, see step 6 to select the desired format).
5) Now the minute flashes: adjust with the "M" key and confirm by pressing the "O/I" button.
English
EN
, insert and/or replace the batteries.
27