Boneco F220CC Instrucciones De Uso página 23

7
Push it in until you feel a noticeable click.
10
Adjust the output using the control.
8
Close the fan unit again with the back grid.
Make sure to set the grid correctly as the device will
otherwise not turn on.
Please note that when turning on the fan for the first
time or after it has not been used for some time you
might hear a slight crackling noise for the first few
minutes. This is the HEPA-ESP filter gaining an elec-
trical charge which allows it to function as a highly
efficient air filter.
9
Plug the power cord into a power outlet.
BONECO F220CC and BONECO F230CC are only dif-
ferent in that the BONECO F230CC includes a second
connector piece.
You can use the fan unit with one, with a second or
without connector pieces. It can be customized to
your needs.
23
en