domoova DRV100 Manual Del Usuario página 16

EN
Operating the robot
Preparing the vibrating water tank
NOTE:
• The vibrating water tank has a maximum capacity of 300 ml. For optimum
performance, it must contain at least 50 ml of liquid. It must only be used on
hard floors.
• The water tank vibrates to recreate a scrubbing action to thoroughly clean hard
floors.
• For optimum cleaning, check the dilution ratio indicated on the detergent bottle.
• Warning: Only use a pH neutral, non-abrasive and non-greasy cleaning product
suitable for hard floors. Use of any other product, such as white vinegar, bleach,
black soap or essential oil could damage the vibrating water tank.
Inserting the vibrating water tank
Clip it to the back of the robot, The robot automatically detects the
water tank thanks to its tank sensor. The robot is ready to start its
cleaning cycle.
Open the water tank's refill
nozzle and carefully pour in clean
water with some pH neutral,
non-abrasive
floor cleaner.
The vacuum mode stops when
the mopping mode is selected;
the vacuum stops when the robot
detects the vibrating water tank.
14
and non-greasy