domoova DRV100 Manual Del Usuario página 19

EN
Operating the robot
Setting the time
Figure 1 Figure 2
Figure 3
You must be near the robot to set the time. The robot must not
be in standby mode to set the time. Press the AUTO button on
the robot or on the remote control to come out of standby mode.
Then press the Set the time button on the remote control
(Figure 1). The time flashes. Use the up/down arrows to modify
the hour and minutes (Figure 2). Press the Set the time button
again to confirm the time (Figure 3). The robot states that the
time is set with the audible confirmation: "setting is confirmed".
17