Siemens iQ700 LI48932 Instrucciones De Uso página 20

Switching over from exhaust air to circulating air mode
Switching the electronic control system
to circulating air mode:
❑ The extractor hood has been set to
exhaust air mode at the factory.
❑ Before the mode can be changed, the
extractor hood must have been
connected and should be switched off.
20
L
1. Press and hold down the
2. Press the button for approx.
3 seconds.
ã
❑ A is displayed.
3. Release the buttons.
❑ The display goes out shortly
afterwards.
Resetting to exhaust-air mode:
1. Repeat the procedure.
#
❑ A is displayed.
2. Release the buttons.
❑ The display goes out shortly
afterwards.
button.