GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should
malfunction or break down, grounding provides a path
of least resistance for electrical current to reduce the
risk of electric shock.
ASSEMBLY PACKET
The assembly packet is with the owner's guide. The
packet contains one machine bolt and nut to fasten the
handle assembly to the container.
CAUTION! Fully assemble the vacuum cleaner
before using.
1. Open the dust bag cover. Slide the metal portion of
the handle assembly down the channel until it fully
seats on the lower retainer. (See Figure 1) Insert the
machine screw through the housing and handle.
Twist on nut and tighten. Close dust bag cover.
Figure 1
2. Plug extension cord into the pigtail connection.
Secure the cord assembly into the retainers at the
back of the handle. (See Figure 2)
Figure 2
PAGE 2 OF 21
SAFETY CONTINUED
The appliance is equipped with a cord having an
equipment-grounding conductor and grounding plug.
The plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance
with all local codes and ordinances.
ASSEMBLY
3. To store the power cord, lift out the lower cord hook
and wrap the cord around the upper and lower
cord hooks. (See Figure 3) The lower cord hook can
be stored flat on the cleaner when not in use.
Figure 3
4. The power cord can be quickly released by pivoting
the upper cord hook downward. Return the upper
hook to the upright position for cord storage.
(See Figure 4)
Figure 4
On models with cleaning attachments, place the wand
into the lower retainer. Make sure the suction valve is set
to the floor cleaning position. Secure the wand into the
wand clip.
0421 IH-2268