Adjusting The Idle Speed - DeWalt DXGST227BC Manuel Del Operador

Air Filter Cover
Cover Screw
Slots
Air Filter Cover

ADJUSTING THE IDLE SPEED

WARNING:
clothing and observe all safety instructions to prevent serious personal injury.
If the engine will not idle properly:
1. Start the engine. Refer to Starting and Stopping.
2. Release the throttle control and let the engine idle.
• If the engine stops, increase the idle speed. Use a small Phillips screwdriver to turn the idle
speed screw clockwise, 1/8 of a turn at a time, until the engine idles smoothly (Fig. 21).
• If the blade spins when the engine idles, reduce the idle speed. Turn the idle speed screw
counterclockwise, 1/8 of a turn at a time, until the blade stops moving (Fig. 21).
The blade may spin during idle speed adjustments. Wear protective
Air Filter
Fig. 19
Hooks
Fig. 20
27
Air Filter
Housing
Cover Screw Hole
Air Filter Housing