Metra 99-5828CH Instrucciones De Instalación

INSTALLATION INSTRUCTIONS FOR PART 99-5828CH
Ford Explorer 2011-up
KIT FEATURES
• ISO DIN head unit provision with pocket
• DDIN head unit provision
• Painted Charcoal Grey
KIT COMPONENTS
• A) Radio Trim panel • B) Radio Brackets • C) Pocket • D) (4) #8 x 3/8" Phillips screws for pocket
• E) (2) #4 x 1/2" Phillips screws for A/C Vent to Housing
• F) (4) #8 x 3/8" Phillips screws for OE Display to Housing • G) (2) Panel clips
B
A
F
METRA. The World's best kits.
(Without Ford MyTouch)
99-5828CH
C
G
1-800-221-0932
™
D E
metraonline.com
Table of Contents
Dash Disassembly
– Ford Explorer 2011-up ......................................... 2
Kit Assembly
– ISO DIN head unit provision with pocket ............... 3
– DDIN head unit provision ...................................... 3
– Rear A/C controls & LCD color adjustment ............ 4
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • AX-ADBOX1 Interface
• AX-ADBOX2 Interface • AX-ADFD02 Harness
Antenna Adapter: • 40-EU10 Multi-App Antenna Adapter
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket Wrench • Torx screwdrivers
CAUTION: Metra recommends disconnecting the negative battery
terminal before beginning any installation. All accessories,
switches, and especially air bag indicator lights must be plugged
in before reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the aftermarket radio.
IMPORTANT NOTE: The factory radio must be powered off before
starting disassembly.
© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION