Metra 99-5839CH Instrucciones De Instalación

KIT COMPONENTS
• A) Radio/Display trim panel • B) Radio/Display sub-trim panel upper (a) • C) Radio/Display sub-trim panel lower (b) • D) Radio brackets upper (a)
• E) Radio brackets lower (b) • F) Pocket • G) (4) Panel clips • H) (12) #6 x 3/8" Phillips pan-head screws • I) (8) #8 x 3/8" Phillips truss-head screws
• J) Touchscreen display assembly and wiring harness
A B
The World's best kits.
®
Ford Mustang
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted charcoal with a matte black center
• Touchscreen interface for climate and
personalization features
C D
H
metraonline.com
2010-2014
E F
I J
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
99-5839CH
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly
-ISO DIN radio provision with pocket ..................4
-ISO DDIN radio provision .....................................5
Axxess Interface Installation .............................6-11
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Axxess interface and wiring
harness included
Antenna Adapter: 40-CR10 (sold separately)
TOOLS REQUIRED
G • Panel removal tool • Phillips screwdriver
• 9/32" Socket wrench
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 8/2/17 INST99-5839CH