4. REPLACING THE FUSE
When the transmitter is not turned on, check that
the fuse is in good condition. Otherwise, it must
be replaced by a new one.
1. Turn off the transmitter.
2. Unscrew the nut on the connector, remove the
nut and the piece of steel.
3.
Replace
the
fuse
(F0.5AL250V)
and
reassemble the connector.
5. SPECIFICATIONS
Input: 12V- - -
Transmission frequency: FM 87.5MHz-108MHz
Remote control:
Input: 3V- - - (1xCR2025)
Product design and specifications are subject to change, without notice.
10