Tripp-Lite B126-1A1 Manual Del Proprietário página 16

Extender/Splitter with Remote/Repeater Installation
Notes:
1) Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid wire Cat5e/6
cable. Using stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher
than 24 AWG, will result in shorter extension distance. Higher gauge cabling, such
as 26 AWG, has a more limited transmission capability than lower gauge cabling. All
Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire cabling.
3) The B126-002 and B126-004 are set to transmit a stereo audio signal by default.
Press the Audio button on the local unit to switch to 7.1-channel surround-sound
audio.
4) The installation diagram shows the B126-004. The B126-002 installation will be
the same, except there are only two remote ports and there is no local monitor port.
B126-004 LOCAL
TRANSMITTER
OPTIONAL LOCAL
MONITOR
BLU-RAY
17-07-081-933731.indb 16
Up to 175 ft. at 1080i (60Hz)
Up to 125 ft. at 1080p (60Hz)
B126-110 REMOTE/
REPEATER
B126-110 REMOTE/
REPEATER
B126-110 REMOTE/
REPEATER
B126-110 REMOTE/
REPEATER
Up to 175 ft. at 1080i (60Hz)
Up to 125 ft. at 1080p (60Hz)
B126-110 REMOTE/ B126-110 REMOTE/
REPEATER REPEATER
B126-110 REMOTE/ B126-110 REMOTE/
REPEATER REPEATER
B126-110 REMOTE/ B126-110 REMOTE/
REPEATER REPEATER
B126-110 REMOTE/ B126-110 REMOTE/
REPEATER REPEATER
16
B126-1A0-WP-1
REMOTE RECEIVER
B126-1A0-WP-1
REMOTE RECEIVER
B126-1A0-WP-1
REMOTE RECEIVER
B126-1A0-WP-1
REMOTE RECEIVER
8/2/2017 8:57:25 AM