Descargar Imprimir esta página

Kohler DEVONSHIRE Instrucciones página 4

Singularizan de gabinete de puerta

Publicidad

Idiomas disponibles

Idiomas disponibles

5. Installing the Shelves.
1. Push/twist the pins into place.
A. Push one side of the shelf into the left or right clips.
B. Snap the shelf down into the opposite side. If
the shelf is too tight, repeat the process from the
other side.
2. Fill the remaining holes with the plugs.
Checklist • Care & Maintenance
1. Cleaning
A. The cabinet door and interior are constructed of mirror and aluminum. Use only a damp cloth to clean. Spray the cloth, not the mirror when
cleaning. Mirrors are damaged by the use of ammonia or vinegar based cleaners. Rubbing alcohol can be used for stubborn stains.
B. Use no abrasive cleansers on any part of the cabinet.
C. The white frame should be cleaned with a damp cloth only.
Bag Part List – Devonshire Cabinet
#8 X 3/8 Side Kits Screws
(SS344)
Door Bumpers (SS340)
209-1019 Devonshire Cabinet
Fig 7
Snap-in Pins (SS131)
#8 X 1 1/2" Phillips
Head Screws (SS328)
6. Installing the Toothbrush Covers
& Door Bumpers.
1. Push the toothbrush covers into place, one up, one
down, one up, one down.
2. These covers can be "wiggled " free to clean the
bristle area when required.
3. Each door can hold four brushes, 2 large bent
handle type brushes (Reach®, Oral B®,
Precision®, etc) 2 straight handle or childrens
brushes
4. Install the clear door bumpers in the round indent
area at the top and bottom of the door.
Toothbrush
Covers
Screw Caps ( SS341)S
(SS341)W
Top Clips (SS265)
4 Side Kits Bracket Foam
tape (SS329)
Door
Bumpers
#8 X 2" Hex Head Slotted Screws
(SS343)
Hole plugs (SS239) W
Toothbrush covers (SS262)W
7/02
cabfax#1015

Publicidad

loading