Tools Required - Warn 4X Instrucciones Generales De Montaje

Required For Flare Installation:
- Safety glasses
- Electric drill
- 1/8" drill bit
- 3/16" drill bit
- Rubbing alcohol or wax remover
- Masking tape or grease pencil
- Spring clamps
- Phillips screwdriver (short)
- Silicone sealant (optional)
For Side Molding Trimming:
- Utility knife or razor blade
- Vise Grip™ type pliers
- Blow dryer or heat gun
- Putty knife
- Cutting guard (a piece of thin metal or plastic about 5" square)
1/4 8 lb. ft. (10.8 N-m)
5/16 17 lb. ft. (12.5 N-m)
3/8 30 lb. ft. (40.7 N-m)
7/16 50 lb. ft. (67.8 N-m)
1/2 75 lb. ft. (101.7 N-m)
©2011 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
T O O L S R E Q U I R E D
T O R Q U E S P E C I F I C A T I O N S
2 26892E1