English - Black and Decker F20 Manual Del Usuario

E N G L I S H
CORDLESS DRILL/SCREWDRIVER F20
CONGRATULATIONS!
You have chosen a Black & Decker tool. Our aim is
to provide quality tools at an affordable price.
We hope that you will enjoy using this tool for
many years.
EC DECLARATION OF CONFORMITY
F20
Black & Decker declares that these
products conform to:
98/37/EC, 89/336/EEC, EN 50260
Level of sound pressure, measured according to
EN 50260:
L (sound pressure)
pA
L (acoustic power)
WA
Always wear ear protection if the sound
pressure exceeds 85 dB(A).
Hand/arm weighted vibration value according to
EN 50260:
Colin Wills
Director of Engineering
BDCI, 4/F, 2 Dai Wang Street
Tai Po Industrial Estate
Tai Po NT, Hong Kong
4
F20
dB(A) 70
dB(A) 83
F20
2
< 2.5 m/s
INTENDED USE
Your Black & Decker drill/screwdriver F20 has been
designed for drilling in softwood and plasterboard
as well as for inserting and removing screws and
nuts using the appropriate accessories. This tool is
not suitable for accessories with a diameter of
more than 6 mm.
This tool is intended for consumer use only.
SAFETY INSTRUCTIONS
Warning symbols
The following symbols are used in this manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of
non-observance of the instructions in
this manual.
Denotes risk of electric shock.
Read the manual prior to operation.
Know your tool
Warning! When using battery-powered
x
tools, basic safety precautions,
including the following, should always
be followed to reduce the risk of fire,
leaking batteries, personal injury and
material damage.
Read all of this manual carefully before
x
operating the tool.
Before operating the tool, make sure
x
that you know how to switch the tool off
in an emergency.
Retain this manual for future reference.
x