Blumfeldt 10035216 Manual De Instrucciones página 22

EN
22
situations. Furthermore, check for eventual obstructions before using the
heater, but in particular after a longer period of inactivity.
• Clean the heater following with attention the instructions given in this
manual.
• After each use the temperature of the heater remains at high values for a
longer time. Take care, not to touch the equipment without mitts before it
has reached ambient temperature.
• It is recommended to discharge the combustion residual after each use.
Discharging, please check for burning or hot combustion material in order
to avoid any burn. Make usage of the underlying internal collecting drawer
• Any repair, replacement or maintenance must be performed by a qualified
technician
• Please contact your authorized retailer or the manufacturer itself for the
resolution of eventual problems.
• Every type of work on the system that may be necessary to install and
use the heater, should be performed by qualified technicians and in
accordance with the laws in force in the country within which you intend
to use the equipment.
• In case of fire, use carbon dioxide extinguishers. do not use water or
powder extinguishers.
• Do not fill the brazier with quantities of pellets lower or higher than those
indicated.
• Do not open the door of the metallic sheathing during the use of the
heater.
• Do not move around the heater during the combustion process.
• Before setting aside the heater in any kind of building, discharge the
internal brazier and the internal collecting drawer.
• Use the heater only outdoors or in surroundings partially outdoors.
• It is furthermore prohibited:
- To install the unit in a different manner than the one described in this
handbook.
- To install the unit in presence of sources that could cause possible
ignition (flames, cigarettes, sparks etc.).
- To install the equipment in areas with a possibility of water jets.
- To install and use the unit close to combustible materials, flammable
and/or explosive materials and in places with hazardous atmospheres
of fire.
- To smoke while using the device or approach with devices that can
generate combustion such as cigarettes or lighted lighters, flames of
various kinds, scintillators.
• Do not modify the equipment or perform technical operations that are
not authorized by the manufacturer. Each technical maintenance or repair
should always be carried out at specialized centres authorized by the
manufacturer.
• Do not use any accessories other than those supplied.
• Do not use the device in different ways and/or for purposes other than
those specified in this manual. In particular the appliance should not be
used as an incinerator.