Sennheiser guidePORT GP SK 3200 Instrucciones Para El Uso página 39

Intended
operation
Temporarily
interrupting a
tour, manual-
ly triggering
an Event
Deactivating
the tour inter-
ruption
Finishing the
guided tour
What to do
Briefly press the FUNC-
º
TION key , then enter
the three-figure Event
number via the numeric
¸
keys .
Before starting the tour,
use the "Visitor Profiler"
software module to set a
max. interruption time.
Set up a System Event
with the ID number 97
and position the identifi-
er(s).
Press the MIC key
(only works if no Live
Event is transmitted and
if the receivers do not
perform a download).
Simultaneously press
the FUNCTION key
and the MUTE key
3 seconds.
LED indications/Result
The READY LED
flashes green. The re-
ceivers start reproduc-
ing the corresponding
Event.
If the maximum inter-
ruption time has ex-
pired, Event
reproduction is auto-
matically stopped.
Event reproduction is
automatically stopped
by an identifier.
µ
The READY LED
flashes green. All re-
ceivers stop reproduc-
ing the Event and
receive the portable
transmitter's signal
again.
The READY LED
º
LINE LED
¾
for
MIC LED
»
»
»
, the
¹
and the
go off.
13