Beko HNU51311SH Manual Del Usuario página 16

4 Cleaning and Maintenance
• Place the metal oil filters in the dishwasher loo-
sely or freely. Metal oil filters should be placed in
the dishwasher without being jammed.
4.2 Washing By Hand
• You can use a special oil dissolving agent for
stubborn dirt. You can get this agent from the
authorised sales center.
• Soften the metal oil filter in hot water contai-
ning dishwashing liquid.
• Use a brush for cleaning and wait for the liquid
on the metal oil filter to be drained well. Rinse
the filters well after cleaning.
• Technical specifications and this manual may be
changed without prior notice.
• This appliance complies with the Regulation for
Supervision of the Waste Electric and Electronic
Equipment.
• This hood is designed to be used over the hob.
Make sure that the wall can bear the weight of
the hood. Cost of crushing, cutting and similar
procedures to be carried out on the wall or cabi-
net during installation should be covered by the
consumer. The hood may be used with a flue
system that discharges the air, or without a flue
(by attaching the carbon filter). Pay attention
to the matters that may be encountered before
or during the installation. Installation should be
performed by the authorised service agent. Ins-
tallation should be carried out by an authorised
specialist who has knowledge of ventilation.
Service life of the appliance identified by the
Ministry of Industry (period of availability for
the spare parts required for the performance
of functions of the appliance) is 10 (ten) years.
• Your appliance must be kept in its original
packaging to avoid damage to its components
during handling and transportation.
• Keep the appliance in its normal position during
handling.
• Do not drop the appliance and protect it against
damage during transportation. Warranty does
not cover the faults and damages occurred
during transportation after delivery of the
appliance to the customer.
16 / EN Hood / User Manual