Bottom View; Remote Sensor; Getting Started; Power Supply - Oregon Scientific RRM902 Manual De Usuario

6. DIMMER: select display brightness
7. COLOUR (OFF·PROGRAM·LOOP):
deactivate color-changing light show; select pre-
programmed (sound specific) light show or rainbow
loop effect
8. : set clock
9. Z Z : activate sleep timer; adjust timer settings (120, 90,
60, 30, 15, 0)
10. VOL+ / VOL-: increase / decrease value
of the setting; increase / decrease volume
11. RESET: reset unit to default settings
12. SEARCH: initiate sensor search
13. PAUSE: select a specific color lighting; restart color-
changing effect
14. Socket for audio line-in

BOTTOM VIEW

1. Adapter socket
2. Battery compartment

REMOTE SENSOR

activate /
1
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4. RESET hole: reset unit to default settings
5. CHANNEL switch: select Channel 1

GETTING STARTED

1

POWER SUPPLY

2
Adapter
The adapter powers the unit. Plug adapter into socket,
making sure the adapter is not obstructed and is easily
accessible to the unit.
To completely disconnect from power, the adapter should be
disconnected from the main unit.
3
2
4
3
5