Power Supply; Powered By Batteries; Battery Consumption Indication; Charging - Sunstech RP-DS30 Manual De Funcionamiento

Receptor digital estéreo fm om oc ol
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

POWER SUPPLY

POWERED BY BATTERIES

1. Open the battery cover.
2. Install 3 new rechargeable or alkaline batteries (AAA size),
then close the battery cover.
3. Turn on the unit.
+
-
+
-
+
Install the batteries correctly
according to the battery polarity.
NOTE:
1. Please don't mix the used batteries with new ones.
2. Please don't mix the rechargeable batteries with the alkaline ones.
3. Please don't charge the alkaline batteries.
4. When the radio is not being used for a long period, remove the batteries
to avoid leakage and corrosion. If battery leakage occurs, wipe the battery
compartment with a soft cloth before inserting new batteries.

BATTERY CONSUMPTION INDICATION

1. Full
3. Low
GB-04
0 05
25
After installing the batteries,
the LCD displays as above.
2. Medium
4. Exhausted, the unit will
turn off automatically.
Charged by the Adaptor

Charged by the Adaptor (not included)

1. Install 3 AAA size rechargeable batteries correctly.
2. Plug one port of the adaptor into the AC socket and plug the
other port into the USB jack, "
3. With the radio off, press <
power icon "
" flows.
4. When the battery power is full, "
disconnect the adaptor and the radio.
NOTE:
1. While charging, please make sure the connection is ok.
2. Charging time is approx. 2 ~ 7 hours, which depending on the capacity of the
rechargeable batteries.
3. Please turn off the radio when charge the radio via adaptor to avoid interrupt.
4. Please plug or unplug the adaptor with the radio off.

Charged by the PC

1. Plug one port of the supplied USB cable into the USB jack of
the PC and the other port into the USB jack of the radio.
2. After connecting correctly, "
3. With the radio off, press <
battery power icon "
" flows.
4. When the battery power is full, "
disconnect the PC and the radio.
POWER SUPPLY
" will display.
> shortly to charge. The battery
" stops flowing. Please
Adaptor
Plug into the
USB Jack
" will appear in the display.
> shortly to charge, and the
" stops flowing. Please
GB-05

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido