Mute Function; Tuning In Stations; Manual Tuning; Auto Tuning - Sunstech RP-DS30 Manual De Funcionamiento

RADIO OPERATION

MUTE FUNCTION

While listening to the program, press <
activate the mute function, press it again to deactivate.

TUNING IN STATIONS

Manual Tuning

1. Select the band.
2. Press < > or < > shortly to increase or decrease
the frequency. Please pay attention to the signal strength
indicator and stop pressing when receives the clear signal.

Auto Tuning

1. Select the band.
2. Long press < > or <
or decreasing on display. The unit will stop
tuning when receives the clear signal. If the frequency
is not very clear, please tune in the station manually.
NOTE: In order to reduce interference and gain better reception, please do not
use the adaptor when tuning in the station automatically.
GB-08
> shortly to
press shortly: manual tuning in stations
long press: auto tuning in stations
> with frequency increasing

Using the Antenna

1. While listening to the FM and SW station, please change
the length of the telescopic antenna to get the best
reception.
2. While listening to the MW or LW station, rotate the radio
to find the position which gives the best reception.
RADIO OPERATION
change the length
GB-09