Morphy Richards PRECISE STEAM PLUS Instrucciones De Uso página 2

g
IMPORTANT
SAFEGUARDS
When using your flatiron, basic
safety precautions should always be
followed, including the following:
• READ ALL INSTRUCTIONS
BEFORE USING.
1 Use iron only for its intended use.
2 To protect against a risk of electric
shock, do not immerse the iron,
cord or plug in water or other
liquids.
3 The iron should always be turned to
'Off' before plugging or unplugging
from outlet. Never yank cord to
disconnect from outlet; instead,
grasp plug and pull to disconnect.
4 Do not allow cord to touch hot
surfaces. Let iron cool completely
before putting away. Loop cord
loosely around iron when storing.
5 Always disconnect iron from
electrical outlet when filling with
water or emptying and when not in
use.
6 Do not operate iron with a damaged
cord or if the iron has been
dropped, damaged or leaking. To
avoid the risk of electric shock, do
not disassemble the iron, take it to a
qualified serviceman for
examination and repair. Incorrect
reassembly can cause a risk of
electric shock when the iron is
used.
7 Close supervision is necessary for
any appliance being used by or near
children.
8 Do not leave iron unattended while
connected or on an ironing board.
9 Burns can occur from touching hot
metal parts, hot water, or steam.
Use caution when you turn a steam
iron upside down – there may be
hot water in the reservoir.
2
10 This appliance is not intended to be
used by young children or infirm
persons unless they have been
adequately supervised by a
responsible person to ensure they
can use the appliance safely.
11 Young children should be
supervised to ensure that they do
not play with the appliance.
Other safety
considerations
• Always locate your iron away from
the edge of the worktop/ironing
board.
• Ensure that the iron is used on a
firm, flat surface.
• Do not use the iron in a bathroom.
• WARNING: Do not place the iron
onto a metal tray or metal
surface whilst in use.
• Do not touch hot surfaces, use
handles or knobs.
• Do not fill above the MAX mark,
otherwise water may be ejected.
• Allow to cool before putting on or
taking off parts and before cleaning.
• Do not use outdoors.
• Do not place the iron on or near a
hot gas or electric burner or in a
heated oven.
• Do not use the vertical steam on
clothes being worn.
• Always disconnect the iron from the
electrical socket when filling with
water or emptying and when not in
use.
• When placing the iron on its heel,
ensure that the surface on which
the heelis placed is stable;
Treating scalds
• Run cold water over the affected
area immediately. Do not stop to
remove clothing, get medical help
quickly.
Electrical requirements
Check that the voltage on the rating
plate of your appliance corresponds
with your house electricity supply
which must be A.C. (Alternating
Current).
If the socket outlets in your home
are not suitable for the plug
supplied with this appliance, the
plug should be removed and the
appropriate one fitted.
WARNING: The plug removed
from the mains lead, if severed,
must be destroyed as a plug
with bared flexible cord is
hazardous if engaged into a live
socket outlet.
Where used, should the fuse in the
13 amp plug require changing, a 13
amp BS1362 fuse must be fitted.
WARNING: This appliance must
be earthed.
INSTRUCTIONS FOR USE
Temperatre guide
Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of the
International Textile Care Labelling Code.
Symbol
(120˚C Max) Cool
Do not iron
Control knob
at all
positions
Fabric Nylon, Acetates
e.g. Acrilan
Courtelle, Orlon
Triacetates, e.g.
Tricel/Polyester
Ironing
Iron on wrong side
if moisture required
use damp cloth
(Not Acetate)
Dry and spray
With water in tank
Without water in tank
'Max
(160˚C Max) Warm (210˚C Max) Hot
Cotton, Linen
Wool, Polyester
Rayon, Rayon
mixtures e.g.
mixtures,
Polyester/Cotton
e.g. Rayon/Linen
Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.
Steam/spray/
Self clean
shot of steam
Dry ironing
g
setting'
3