Veridian Healthcare 09-349 Guia Del Usuario

Infrared Forehead
Thermometer
Model 09-349
These brief instructions allow you to quickly begin using your
Infrared Thermometer for Body Temperature Measurements.
Please refer to the Instruction Manual for more detailed
instructions covering all features of the thermometer, including
Object Temperature measurements.
• The infrared technology used in this thermometer is safe and
is not harmful in any way. However, we recommend avoiding
looking into the lens during use
IF YOU HAVE ANY QUESTIONS OR ARE EXPERIENCING DIFFICULTIES, PLEASE CALL THE
TOLL-FREE CUSTOMER SERVICE HELP LINE FOR FURTHER ASSISTANCE AT 1-866-326-1313.
USER GUIDE:
To measure body temperature using your Infrared
Thermometer, follow these steps:
POWER button to turn the thermometer
1. Press the
on. The unit will run a self-test and all symbols on the
display will momentarily appear, Fig. 1.
2. Ensure that the thermometer is in Person mode; the
Person symbol will be on the display. To alternate
between modes press and release the PERSON/
OBJECT Mode button until you see the desired
measurement symbol on the display
3. Aim the infrared lens at the individual's forehead,
holding the thermometer approximately 1" away.
4. Press and release the MEASURE button. The Person
symbol, Scan in Progress symbol and "- - " will be
displayed, Fig. 2.
5. The positioning sensor will detect if the thermometer
is in the correct position. As necessary, slowly and
steadily move the thermometer toward or further
from the forehead until the thermometer is positioned
correctly. The display will show flashing dashes and
will beep steadily while finding the position.
6. When the location is correct, the reading will will occur
in 1-second. The thermometer will emit a final beep,
and the results will appear on the display, Fig 3.
7. If the temperature measurement is below 100.4°F
(38°C), a happy face will appear on the display. If the
reading is at or above 100.4°F (38°C), a sad face will
display and the device will sound 1 long and 2 short
beeps, Fig 4..
8. After about one minute after use, the thermometer
will automatically beep and shut off.
NOTE: Proper placement and position of the
sensor is crucial for effective and accurate
measurement.
PLEASE NOTE:
• Wait at least one minute between consecutive readings to
ensure accuracy.
• Attempting to take temperature readings from sites on the body
Fig. 1
other than the forehead may produce inaccurate results.
• The patient should remain still while the reading is being taken.
• If "Lo," "Hi," "Err," or another error message appears, see the
Troubleshooting section of the manual for instructions on how
to resolve the problem.
• Infrared forehead temperature readings are equivalent to oral
Fig. 2
temperature readings.
• Readings taken while asleep should not be compared directly to
readings taken while awake, as body temperature while asleep
is typically lower.
• Do not take body temperature readings within 30 minutes of
Fig. 3 being outdoors, exercising or bathing.
• Illness may be present even without an elevated temperature,
particularly in the elderly, in infants under 3 months of age, and
those with compromised immune systems. If illness is apparent
without a fever, consult with a healthcare professional.
Fig. 4
Distributed by:
Veridian Healthcare
1175 Lakeside Drive
Gurnee, IL 60031
www.veridianhealthcare.com
Made in China
#93-2020 07/19
©2019 Veridian Healthcare, LLC