Kohler Sterling 660B/SP Serie Guia De Instalacion página 5

Measure
here.
Angled Base
2. Measure and Cut the Bottom Track
CAUTION: Risk of personal injury. Always wear safety glasses when cutting materials.
IMPORTANT! If your shower has a curve in the corners where they meet the sidewalls, be sure to
measure from wall to wall above the curves. Failure to measure above the curve or angle could result in
the bottom track being cut too short.
IMPORTANT! This model of shower door may have both a tapered and straight style of wall jamb
enclosed. Follow the directions for the proper wall jambs.
Measure from wall to wall at the flattest part of the shower ledge (dimension "D").
Mark dimension "D" on the bottom track.
IMPORTANT! For best results, use a 32-teeth per inch hacksaw blade and a miter box to cut the bottom
track.
NOTE: If there are curves where the sidewalls meet the threshold, use a file to contour the bottom track
edges to match the curves.
Straight Wall Jambs
IMPORTANT! For best results, use a 32-teeth per inch hacksaw blade and a miter box to cut the bottom
track.
If you are using the straight wall jambs, subtract 1/8" (3 mm) from dimension "D" and cut the
bottom track to this dimension.
Tapered Wall Jambs
IMPORTANT! For best results, use a 32-tooth hacksaw blade and a miter box to cut the bottom track.
Sterling
Measure distance
"D" above curves in
the corners.
D
Important: Measure carefully. If your walls are curved or
angled, measure above the curve or angle. Failure to do
so can result in an improperly cut bottom track and can
void the warranty.
5
Measure
here.
Curved Base
1034039-2-C