Kohler Sterling 660B/SP Serie Guia De Instalacion página 10

Straight Wall Jamb
Wall Bumper
(Guiding Lip)
Toward Inside
of Shower
#8-18 x 1-1/4"
Panhead Screw
6. Install the Wall Jambs
Installing Straight Wall Jambs
Place a wall jamb over the bottom track. Align the holes in the wall jamb with the holes in the wall.
Secure the wall jamb to the wall with three #8-18 x 1-1/4" panhead screws.
Repeat the procedures with the other wall jamb.
Installing Tapered Wall Jambs
Place a wall jamb over the bottom track. Align the holes in the wall jamb with the holes in the wall.
Position the tapered section on the bottom against the wall of the shower opening.
NOTE: The top and bottom screws should be inserted through bumpers before being installed. Do not
overtighten the screws or damage to the bumpers may occur.
Secure the wall jamb to the wall with three #8-18 x 2" panhead screws.
Repeat the procedures with the other wall jamb.
1034039-2-C
Wall
Jamb
10
Tapered Wall Jamb
Bumper
#8-18 x 2" Panhead
Screw
Sterling