Linksys Ea4500 - Cisco Linksys EA Serie Manual Del Usuario

Linksys EA-Series

Linksys EA4500

Model Name Linksys EA4500
Description Dual-Band N900 Router with Gigabit and USB
Model Number EA4500
Standards 802 11n, 802 11a, 802 11g, 802 11b, 802 3,
802 3u, 802 3ab
Radio Frequency 2 4 and 5 GHz
Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet)
Ports Power, USB, Internet, Ethernet (1-4)
Buttons Reset, Wi-Fi Protected Setup
LEDs Top panel: Power
Back panel: Internet, Ethernet (1-4)
Number of Antennas 6 total, 3 internal antennas per
each 2 4 GHz and 5 GHz radio band
Detachable (y/n) No
Modulations 802 11b: CCK, QPSK, BPSK
802 11g: OFDM
802 11a: OFDM
802 11n: BPSK, QPSK, 16-QAM, 64-QAM
Receive Sensitivity 2 4 GHz
802 11b: -87 dBm @ 11 Mbps (Typical)
802 11g: -77 dBm @ 54 Mbps (Typical)
802 11n: 20 MHz: -70 dBm @ MCS23 (Typical)
802 11n: 40 MHz: -66 dBm @ MCS23 (Typical)
5 GHz
802 11a: -74 dBm @ 54 Mbps (Typical)
802 11n: 20 MHz: -67 dBm @ MCS23 (Typical)
802 11n: 40 MHz: -64 dBm @ MCS23 (Typical)
Antenna Gain in dBi 2 4 GHz (3 internal PIFA antennas)
PIFA 1 ≤ 3 31 dBi (Right)
PIFA 2 ≤ 3 45 dBi (Front)
PIFA 3 ≤ 1 96 dBi (Left)
5 GHz (3 internal PIFA antennas)
PIFA 1 ≤ 3 71 dBi (Right)
PIFA 2 ≤ 3 60 dBi (Front)
PIFA 3 ≤ 4 27 dBi (Left)
Supported File Systems
for Storage Device FAT32, NTFS, and HFS+
UPnP Supported
Security Features WEP, WPA, WPA2
Security Key Bits Up to 128-bit encryption
Environmental
Dimensions 8 86" x 0 98" x 6 30"
(225 x 25 x 160 mm)
Unit Weight 12 7 oz (360 g)
Power 12V, 2A
Certifications FCC, IC, CE, Wi-Fi a/b/g/n,
Windows 7, DLNA
Operating Temp 32 to 104°F (0 to 40°C)
Storage Temp -4 to 140°F (-20 to 60°C)
Operating Humidity 10 to 80% relative humidity,
non-condensing
Storage Humidity 5 to 90% non-condensing
noTES
For regulatory, warranty, and safety information, see the CD that
came with your router or go to Linksys.com/support
Specifications are subject to change without notice
Maximum performance derived from IEEE Standard 802 11
specifications Actual performance can vary, including lower
wireless network capacity, data throughput rate, range and
coverage Performance depends on many factors, conditions and
variables, including distance from the access point, volume of
network traffic, building materials and construction, operating
system used, mix of wireless products used, interference and other
adverse conditions
Specifications
18 18