Ea4500; Top View; Back View - Cisco Linksys EA Serie Manual Del Usuario

Linksys EA-Series

EA4500

Top view

• Indicator light—Stays on steadily while power is connected and
following a successful Wi-Fi Protected Setup connection Pulses slowly
during bootup, during firmware upgrades, and during a Wi-Fi Protected
Setup connection Flashes quickly when there is a Wi-Fi Protected Setup
error

Back view

Ethernet ports
• Ethernet ports—Connect Ethernet cables (also called network cables)
to these Gigabit (10/100/1000) ports, color coded blue, and to other
wired Ethernet network devices on your network
Indicator light
• Internet port—Connect an Ethernet cable (also called a network or
Internet cable) to this port, color coded yellow, and to your modem
• Wi-Fi Protected Setup™ button—Press this button to easily configure
wireless security on Wi-Fi Protected Setup-enabled network devices For
more information, see "Wireless Security" on page 8
• USB port—To easily share disk storage with other users on your network
or on the Internet, connect a USB drive to this port
• Reset button—Press and hold this button for 5-15 seconds (until the
port lights flash at the same time) to reset the router to its factory defaults
You can also restore the defaults using the browser-based utility
• Power—Connect the included AC power adapter to this port
CAUTIon
Use only the adapter that came with your router
• Power button—Press | (on) to turn on the router
Product overview
Internet port Power port
Wi-Fi Protected Setup button Reset button
USB port
2