Connecting Drain Hose - LG SIGNATURE LUDP890 Serie El Manual Del Propietario

Connecting Drain Hose

If the end of the drain hose does not fit the drain
line, use a heat and detergent resistant adapter
(not supplied). These may be obtained from a local
plumbing supply store.
• Cut the adapter so the end matches the size of
the drain connection.
NOTE
• For drain hose installation, use the screw style
hose clamp provided with this dishwasher in the
silverware basket.
• If connecting the dishwasher's drain hose to
the garbage disposal, be sure to follow your
garbage disposal's manual for proper installation
instructions.
Drain Hose Requirements
• Follow local codes and ordinances.
• Do not exceed 12 ft. (3.65 m) distance to drain.
• Do not connect drain hoses from other
appliances to the dishwasher's drain hose.
• If an extension drain hose is required, use a 5/8"
or 7/8" inside diameter, 2-3 ft. length hose and a
coupler for connecting the two hose ends.
a
Connecting to Disposal without Air
Gap
The height of the drain hose end must be at least
12" (305 mm) and within 40" (1016 mm) from
the base of the dishwasher to avoid water being
siphoned from the tub.
1
Remove the knockout plug
with a hammer and screwdriver.
2
Remove the knockout plug
disposal.
CAUTION
• If the knockout plug has not been removed,
the dishwasher will not be able to drain
properly.
INSTALLATION 23
on the disposal
a
from the
a