Base Station; Programming The Telephone; Programming Functions - THOMSON 28115 Serie Guia Del Usuario

Base Station

1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your
telephone base on a level surface, such as a desktop or tabletop.
. Plug one end of the telephone line cord into the TEL LINE
jack on the back of the base and the other end into a
modular jack.
. Plug the AC power converter into the electrical outlet and
the DC connector into the jack on the back of the base.
4. Place the handset in the cradle on the base.
5. The charge indicator turns on, verifying the battery is
charging. The unit will take 0 seconds to register and
verify its security code.
6. Allow the phone to charge for 1 hours prior to first use. If you don't properly charge the
phone, battery performance is compromised.
CAUTION: To reduce risk of personal injury, fire, or damage use only the
5-2763 power adaptor listed in the user's guide. This power adaptor is
intended to be correctly orientated in a vertical or floor mount position.

Programming the Telephone

Standby Screen
The handset displays the handset number and user name.

Programming Functions

The system uses a menu structure to give you access to all of the
built-in features. You may program the following items in main menu:
Keylock, Room Monitor and Handset Setup.
Keylock
The keylock feature, helps prevent unauthorized or accidental use of your device by disabling
outbound calls. The device will still be able to receive phone calls and place emergency calls to
9-1-1.
1. Make sure your phone is OFF (not in talk mode).
. Press the menu ok/mute button to go to the main menu.
10
JOHN SMITH
HANDSET 1