Inserting A Pause In The Dialing Sequence - THOMSON 28115 Serie Guia Del Usuario

6. Press the menu ok/mute button again to save your selection. The display shows ADD TEL
NUMBER.
7. Use the touch-tone pad to enter the telephone number (up to 0 digits, including pauses),
and press the menu ok/mute button to confirm, The records are stored alphabetically in
the phone book.

Inserting a Pause in the Dialing Sequence

Press the #PAUSE/RINGER button on the handset's touch-tone pad to insert a delay in dialing
sequence when a pause is needed to wait for a dial tone (for example, after you dial 9 for an
outside line, or to wait for a computer access tone.) Each pause counts as one digit in the
dialing sequence.
Edit Records
1. Make sure the phone is OFF (not in talk mode).
. Press the mem button to access the phone book sub-menu.
. Use the vol/CID ( 6 or 5) button to scroll to EDIT RECORDS.
4. Press the menu ok/mute u button to confirm, display will show the records.
5. Use the vol/CID ( 6 or 5) button or key in alphabet to move to desired record, press mem
button to confirm, ENTER NAME shows on the display.
6. Repeat Steps 5 through 7 in "Add Records" section.
Delete Records
1. Make sure the phone is OFF (not in talk mode).
. Press the mem button to access the phone book sub-menu.
. Use the vol/CID ( 6 or 5) button to scroll to DELETE RECORDS.
4. Press the menu ok/mute button to confirm, display will show the records.
5. Use the vol/CID ( 6 or 5) button or key in alphabet to move to desired record, press the
del/intercom/conf button, DELETE? shows on the display.
6. Press the del/intercom/conf button again to confirm.
NOTE: If you don't want to change or delete a record, simply press the end
button, or wait for one minute to exit automatically.
8
(of a Stored Number)