Troubleshooting - Hkoenig V24 Manual De Utilización

operation until it is clean.
• Checking that the seal is present and
that the cap is screwed on properly.
• Fill the water tank again.
• Turn the appliance on again.
• Before
sink or another container and check that
the steam is clean. This should take a
few seconds.
• Resume ironing normally.

TROUBLESHOOTING

PROBLEM
Water comes out of
the iron instead of
steam
The appliance is on
but it
producing steam
Suggestions
Divide the
temperatures.
lower temperature. For fuller details, refer to the chart at end of
this booklet.
ironing,
The appliance has
not
right
yet.
The
control dial has set
at the minimum.
Water
is not empty
inserted correctly.
washing according
Start by ironing those garments that require a
release steam into the
CAUSE
reached the
temperature
temperature
tank is
or not
to
SOLUTION
Wail for the "Steam
Ready" indicator
light and the iron
indicator light
turn off. lncrease
the regulation of the
temperature control
dial.
Fill the water tank.
the correct
to
ironing