Mounting Instructions; Combo Mount Hanger Kit (Fixture And Psu2); Perpendicular Mount Kit (Fixture) - Osram FLUENCE VYPR 3p GLOBAL Guía De Instalación Y De Usuario

9. MOUNTING INSTRUCTIONS

9.1 Combo Mount Kit (AMV3-10569-20)
Suitable for pipes up to 1 3/4" (44.5 mm) in diameter, and for
trusses or channel up to 2 3/4" (69.9 mm) wide.
1 Take (2) mounting hangers. Hang both brackets over the support
structure as shown
2 Mount the power supply in the desired location, per the installation
steps for your purchased mounting hardware.
Hook each hanger end onto the upper loops at each corner of the
3
power supply.
Take (2) more mounting hangers as shown and Insert them through a
4
slot between the VYPR fixture cooling fins. Space them to line up with
the power supply lower loops. Pull up to clip the hangers to the fixture.
Hold the VYPR fixture up to the underside of the power supply as
5
shown.
6
To complete the mounting, hook each hanger end onto the lower loops
at each corner of the power supply.
4a
9.2 Perpendicular Mount Kit (AMV3-10572-20)
Suitable for 25 mm x 50 mm T-slotted strut.
CONTINUED ON NEXT PAGE
4b
Front View
11.48"
(292 mm)
1
3a
5
FRONT VIEW
8.38"
(213 mm)
2
3b
6
11