Tabla de contenido
Publicidad
4. IMPORTANT SAFETY PRECAUTIONS & EXPLANATION
OF SYMBOLS
•
Please read this manual thoroughly before attempting to install or
operate any Fluence VYPR Series system.
•
After successful installation and configuration of the system, be sure
to retain this manual in a safe place for future reference. Safety is a
key component to a long lasting and trouble free installation.
•
It is important you read, fully understand, and observe the subsequent
safety precautions. If you are not comfortable with the installation of
high performance lighting systems, you should seek the services of a
qualified installation professional or call us for help.
•
NOTICE: VYPR is a high-performance lighting system. Do not touch
while in operation.
•
Connect the system only to the power sources of the appropriate
voltage using the correct AC plug type. Protect power cables from
being pinched, walked on, or otherwise damaged. Be especially
careful where the power cable enters the power outlet and the unit.
Only connect the system to an electrical outlet or extension cord of
appropriate type and rating. Connect the system only to the power
sources of the correct voltage using the plug received.
•
DO NOT defeat the safety purpose of a grounding or polarized plug by
removing ground pins or using unsafe adapters. A polarized plug has
two blades – one wider than the other. A grounding plug has a third
ground prong in addition to the two main conductors. The wide blade
or third grounding prong is provided for your safety. If the provided plug
foes not fit your outlet, consult an electrician to replace your obsolete
outlet. If you replace the power cord, only use one of similar type and
equal or greater current rating.
•
The system should only be cleaned as directed in the manual. You
should seek service for your system by qualified service personnel if
any of the following occur:
1. The power-supply cord or the plug has been damaged.
2. The unit has been exposed to rain.
3. The unit exhibits a marked change in performance.
4. The unit has been dropped, or its enclosure or chassis is damaged.
5. CULTIVATION BEST PRACTICES
Fluence encourages everyone to experiment and pursue their own
techniques. Every crop is different and everyone has different goals.
However, our internal research has given us insight into several
strategies we would like to share.
•
Regularly check your plants' growth and health. Fluence lighting systems
deliver high levels of PAR, typically more than experienced in nature.
Adjustments to H 2 O, CO 2 , RH, nutrients, and temperature are typically
required.
8
•
Mount your fixture at least 18" from the top of your canopy to
ensure optimal uniformity and consistent PPFD. The VYPR Series
was designed to provide uniform light dispersion and requires
precise deployment. A 1" variation in either direction will have a
significant effect in uniformity and PPFD (which may or may not be
desired).
•
Many plants prefer higher temperatures when exposed to high PPFD.
Experiment with higher temperatures to achieve higher yields. Canopy
temperature and room ambient temperature often vary. For accurate
results, test at the canopy level to gauge leaf surface temperature.
For cultivation recommendations visit
https://fluence.science/science-articles/
6. GENERAL CARE
VYPR lighting systems are passively cooled with zero moving
components. They are designed for harsh environments and years of
maintenance-free performance. Some basic care will keep your system
operating at peak performance cycle-after-cycle.
•
Natural convection removes heat away from the heatsink. In order for
the system to properly cool itself, at least one inch of space is required
between the fixture and the roof of your grow area. Failure to do so
may shorten the fixture's lifespan.
•
To achieve the optimal lifespan and performance of your fixtures,
routinely check for and remove excess dust, debris, and mineral build
up from heatsink and LED array. Cleaning should always be done
with the fixture unplugged from its power source using low-pressure
compressed air or water to rinse off heatsink or LED array.
•
Never use a cloth to clean the diode array. Doing so can scratch or
compromise the integrity of the silicon seal, or dislodge diodes entirely.
•
To limit degradation, avoid touching the diodes with your hands, even
in a powered off state.
For detailed instructions for maintenance and cleaning, visit
www.fluence.science/support-center/
VYPR is a high-performance lighting
system. Do not touch while in operation.
PLEASE RECYCLE ALL PACKAGING MATERIAL.
Publicidad
Tabla de contenido
