Combo Mount Hanger Kit (Psu2) - Osram FLUENCE VYPR 3p GLOBAL Guía De Instalación Y De Usuario

9. MOUNTING INSTRUCTIONS
Light Fixture with Unistrut, Pipe, or Square Hanger Kit
1
Take (2) mounting brackets. Hang a bracket over the
support structure and hold up the VYPR fixture under it.
2 While maintaining a firm grip on both, pinch the bottom
of the bracket inward and insert it into the top of VYPR
heatsink between the fins, release the tension of the
bracket.
3 When installed properly, the bracket should hook into both
sides of the VYPR heatsink frame to provide a level and
secure mount.
4
Repeat steps 1-3 on the other side of the fixture to finish
mounting your VYPR. The two brackets should be centered
to the fixture and widely spaced out, with 3"-8" to the
fixture edge.
Power Supply Remote with Unistrut, Pipe, or Square Hanger Kit
1
Take (2) mounting brackets and hang a bracket over the
support structure. Locate the holes for brackets on the
narrow side of PSU power supply, hold up the power supply
under the support structure under it.
2
While maintaining a firm grip on both, pinch the bottom
of the bracket inward and horizontally insert it into the
receiving holes on the PSU power supply, release the
tension of the bracket.
3
Lift the ends of the brackets up to a 90° angle. Repeat
above steps to install another bracket on the PSU power
supply.
Power Supply Remote with Combo Mount Hanger Kit
1 Take (2) mounting hangers. Hang both brackets over the
support structure as shown.
2
Hold the power supply up to the hangers as shown.
Hook each hanger end onto the upper loops at each corner
3
of the power supply.
14
2
1
2
1
4
2
1
3
3
3a
3b