Tabla de contenido
Publicidad
9. MOUNTING INSTRUCTIONS
9.8 Power Supply Remote with Surface Mount Kit
Surface mount brackets are
suitable for mounting to any flat
surface that will support the
weight of the power supply.
Bracket Positions
The mounting brackets can be
installed outward or inward.
If installed inward, it may be
necessary to first mount the
brackets to the surface.
Bracket Installation
Place one bracket behind the power supply end plate and align the
1
screw holes
2
Install a screw and washer in each hole and tighten. Ensure the
washer is installed in the correct direction as shown for proper fit
and function. Do not overtighten.
3
Repeat steps 1 and 2 at the other end. Mount the power supply
to the desired surface using suitable hardware for the surface
material, and weight of the power supply.of the power supply.
Recommended Mounting Positions
PSU2 LVG, HVE
PSU2 HVG
Inward
Outward
1
1.52" (38.62 mm) + PS Height
1.52" (38.62 mm) + PS Height
2
15
Publicidad
Tabla de contenido
