Cleaning The Motor Protection Filter; Replacing The Dustbag - Philips FC8138 Manual Del Usuario

Cleaning the motor protection filter

To maintain optimal performance, clean the motor protection filter at least once a year.
1 Pull the cover upwards to open it (Fig. 17).
2 Lift the dustbag holder out of the appliance. (Fig. 18)
Make sure you hold the dustbag upright when you lift it out of the appliance.
3 Pull the filter holder with the motor protection filter out of the appliance. (Fig. 19)
4 Take the motor protection filter out of the holder. Shake the motor protection filter over a
dustbin to clean it.
5 Put the filter in the filter holder and slide the filter holder back into the appliance.
6 Put the dustbag holder back into the appliance.
Cleaning the mini turbo brush (specific types only)
To clean the brush inside the mini turbo brush, follow the steps below.
1 Rotate the brush inside the mini turbo brush until the cutting groove faces you. Use a pair of
scissors to cut the hairs, threads etc. that have collected around the brush. (Fig. 20)
2 Remove fluff, hairs and other dirt from the brush.
Storage
1 Switch off and unplug the appliance.
2 Press the cord rewind button to rewind the cord (Fig. 21).
3 Put the appliance in upright position. To attach the nozzle to the appliance, insert the ridge on
the nozzle into the storage slot.
Note: To ensure stable storage of the telescopic tube, adjust the tube to the shortest length.
Replacement
The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.

Replacing the dustbag

- Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently,
i.e. even when the nozzle is not placed on the floor (Fig. 22).
1 Switch off and unplug the appliance.
2 Pull the cover upwards to open it.
3 Lift the dustbag holder out of the appliance.
Make sure you hold the dustbag upright when you lift it out of the appliance.
4 Pull at the cardboard tag to remove the full dustbag from the holder (Fig. 23).
When you do this, the dustbag is sealed automatically.
,
5 Slide the cardboard front of the new dustbag into the two grooves of the dustbag holder as
far as possible. (Fig. 24)
All manuals and user guides at all-guides.com
ENGLISH
9