BaByliss PRO BABFB1E Manual De Instrucciones página 9

proper operating performance.
When cleaning is needed, unplug
the cord, allow to cool and clean
dust and lint from air intake open-
ings with a small brush or the
brush attachment of a vacuum
cleaner. The outer surface of the
dryer should be wiped clean with
a cloth only.
Blocked or clogged air intake
vents will cause the dryer to over-
heat. If overheating occurs, an
automatic safety device will shut
the dryer or the heat off to prevent
damage or personal injury. If the
unit or the heat cycles off , turn the
dryer off , unplug the cord, and al-
low the dryer to cool for 10 to 15
minutes before restarting. Make
sure air vents are clean, by follow-
ing below steps.
1. Remove intake fi lter from back
of dryer by twisting counter-
clockwise.
2. Reach through opening, and
press the mesh screen to release
it from the fi lter (Fig. 1).
3. Visually inspect the fi lter to
make sure no hair is caught
(Fig. 2). Rinse the mesh screen
ONLY under running water
to clear any debris. Repeat as
needed, or use a stiff bristle
brush for any diffi cult build-up.
4. Make sure the mesh screen is
free from any debris and com-
pletely dry. Place screen into
bottom part of removable in-
take fi lter (Fig. 3).
5. Press with your fi nger around
the edge of the screen to lock
mesh screen in place (Fig. 4).
9