Steren COM-260 Manual De Instrucciones página 29

- To see only the channels that have signal in your area, use the CHANNEL SCAN function
on the TV menu.
- If you press RCL, you may return to the last tuned channel.
- Use RES to change the screen resolution. Do this with care, since that resolution must be
supported by your monitor. When the resolution is bigger than the supported by the monitor,
the image can be cut or simply it will not appear.
- You can save up to 9 favorite channels using FC MEMO. Select the channel that you want
to save, press this button and choose the number that you want to assign.
- For favorite channels, click FC SCAN followed of the number in which the channel is stored.
- If you press CH VIEW a mosaic with images of the last 9 tuned channels will be shown. You
can select any of them by pressing the corresponding number key.
VGA input
- When the converter is off or when you select VGA INPUT mode you can see the image
from the computer.
- In this mode, you can use the PiP (Picture-in-Picture) function, by which you will be able to
see the image of the computer and the TV signal simultaneously. To activate it, press PIP. By
pressing it once, the TV signal or video will be displayed in average size. If you click it twice,
you will see small and if you press it 3 times, will exit the PiP mode.
- You can move the PiP window with the up / down / left / right buttons.
- To change the input you see in the PiP window use the INPUT key.
- To change the channel, use CH +/- or numeric keys.
13 13