Salter BPA-9301-EU Manual De Usuario página 2

General Description
Thank you for selecting Salter arm type blood pressure monitor BPA-9301-EU. The monitor features blood pressure
measurement, pulse rate measurement and the result storage. The design provides you with two years of reliable
service. Readings taken by the BPA-9301-EU are equivalent to those obtained by a trained observer using the cuff
and stethoscope auscultation method.
This manual contains important safety and care information, and provides step by step instructions for using the
product. Read the manual thoroughly before using the product.
Features:
• 73mm×49mm Blue LCD display with white backlight
• Maximum 60 records per each user, except user Guest
• 3rd technonoly: Measuring during inflation
Indications for Use
The Salter Blood Pressure Monitor is digital monitors intended for use in measuring blood pressure and heartbeat
rate with arm circumference ranging from 22cm to 42cm (about 8¾˝-16½˝).
It is intended for adult indoor use only.
Contraindications
1. The device is not suitable for use on may be pregnant women or pregnant women.
2. The device is not suitable for use on patients with implanted, electronical devices, such as cardiac pacemakers,
defibrillators.
Measurement Principle
This product uses the Oscillometric Measuring method to detect blood pressure. Before every measurement, the unit
establishes a "zero pressure" equivalent to the air pressure. Then it starts inflating the arm cuff, meanwhile, the
unit detects pressure oscillations generated by beat-to-beat pulsatile, which is used to determine the systolic and
diastolic pressure, and also pulse rate.
Safety Information
The below signs might be in the user manual, labeling or other components. They are the requirement of standard
and using.
Symbol for "THE OPERATION GUIDE
MUST BE READ"
Symbol for "COMPLIES WITH
0123
MDD 93/42/EEC REQUIREMENTS"
Symbol for "MANUFACTURER"
Symbol for "SERIAL NUMBER"
Symbol for "DIRECT CURRENT"
Symbol for "MANUFACTURE DATE"
Caution: These notes must be observed
to prevent any damage to the device
INTRODUCTION
Symbol for "TYPE BF APPLIED PARTS"
Symbol for "ENVIRONMENT PROTECTION
- Waste electrical products should not
be disposed of with household waste.
Please follow local guidelines.
Authorized Representative in the
European Community
For indoor use only
F1
T1A/250V 3.6*10CCC
Symbol for "Class II Equipment"
2 I UK