GYS NOMAD POWER PRO 12XL Manual De Instrucciones página 10

Translation of the original instructions
Connection / disconnection:
• Disconnect the power supply before connecting/disconnecting
Class II device (NOMAD POWER charger)
Class III device (NOMAD POWER).
Maintenance:
• The power supply cable cannot be replaced. If the cable is
• Service should be performed by a qualified person
• Warning! Always remove the power plug from the wall socket
• Under no circumstances should solvents or other aggressive
• Clean the device's surfaces with a soft, dry cloth.
Regulations
• The device complies with European Directive.
• The certificate of compliance is available on our website.
• EAC conformity mark (Eurasian Economic Commission)
• Equipment in compliance with British requirements. The British
• Equipment in conformity with Moroccan standards.
• The declaration C‫( م‬CMIM) of conformity is available on our
Disposal:
• This product should be disposed of at an appropriate recycling
• The battery must be removed from the device before the latter is
• The device must absolutely be disconnected from the power
10
NOMAD POWER PRO 12 XL / 24 XL
the device to/from the battery.
damaged,the device should not be used (NOMAD POWER
charger).
before carrying out any work on the device.
cleaning agents be used.
Declaration of Conformity is available on our website (see home
page).
website (see cover page).
facility. Do not dispose of in domestic waste.
discarded.
supply network before removing the battery.
EN