Troubleshooting - GYS NOMAD POWER PRO 45 Manual De Instrucciones

FLASHLIGHT FUNCTION
PROTECTIONS
This device is protected against short-circuits, polarity reversals and use under non-recommended temperatures (reminder: optimum
working condition -20°C / +40 °C).
TROUBLESHOOTING, CAUSES, REMEDIES

TROUBLESHOOTING

No response while pressing the ON/
1
OFF button
2 Impossible to start the vehicule.
10
NOMAD POWER PRO 45
When power is on, press the button
Briefly press the button
normal, flash, SOS and OFF).
CAUSES
The NOMAD POWER PRO is discharged.
Vehicle battery level is too low.
Vehicle battery is out of order.
Engine size is too big
- Petrol engine : 3500 cm3 max
- Diesel engine : 2000 cm3 max
Short-circuit
to turn on the LED.
to switch lighting modes (4 available modes:
REMEDIES
Charge the product (see page 8).
Force the start (see step 6b).
Change the vehicle battery
-
Check that the clamps are connected properly (see step 4).
EN