Microsoft XBOX 360 Manual De Instrucciones página 4

Expansion port
CONNECT YOUR HEADSET TO
YOUR CONTROLLER
Turn down the volume by rotating
1
the volume control all the way to
the left. Insert the 2.5 mm headset
connector into the controller
expansion port at the back of your
game controller.
Put on your headset and adjust
2
the microphone.
NOTE
Correct placement of the headset
and microphone is critical to using
your headset successfully. Make
sure the headset goes over the
top of your head, not around the
back of your head. You may rotate
4
Mute
Volume
the microphone and earpiece to
your right or left side. Position the
microphone about one inch (2.54
cm) from your mouth and off to
one side. This will ensure that it
doesn't transmit your breathing
into a chat session. As you adjust
the microphone, make sure the
microphone opening is pointed
towards your mouth and not
rotated on its axis.
Now the headset is ready for a
3
game or chat session. Start your
game or chat and turn the volume
up to a comfortable level.